Conservation Glazing


Conservation Reflection Control® is the conservation grade non-glare glass solution. Different from the invisible finish of an anti-reflective glass product, Conservation Reflection Control has a matte-like finish that scatters light to reduce unwanted glare.

Additionally, this product provides 99% UV protection to protect against fading. Tru Vue uses a proprietary coating process to produce this ultra protective glass option. An inorganic silica-based UV inhibiting coating is permanently cured onto the glass surface.

  • Matte-like finish to minimize glare and allows 89% light transmission
  • Blocks up to 99% of UV light rays
  • Achieves over 97% light transmission to enhance colours, brightness and contrast levels
  • Meets ISO 18902 and passes ISO 18916, by providing at least 97% UV protection
  • Does not degrade or delaminate over time. Tru Vue use a proprietary inorganic, silica-based UV blocking coating with a matte-finish, which is "baked" into the glass producing a permanently bonded coating.
  • 2.5mm glass substrate


  • To minimize glare while protecting artwork against harmful UV light rays
  • Use on any framing project with up to two mats away from artwork without significant resolution loss



Size Number of lites per box
32" x 40" 6
36" x 48" 4
40" x 60" 2



  • Glass should be handled with care. Cotton gloves should be worn to minimize injury
  • Avoid dragging the lites of glass against one another when removing from the box
  • Do not slide the lite of glass into place. Lift it up to adjust position


  • Place a non-slip surface (such as suede matboard) between the glass and the back of the wall cutter to avoid scratching
  • For Tru Vue Conservation Grade glass products, place the lite of glass in the wall unit with the UV coated side towards the wall, facing the slip sheet. Do not score the UV coated side. The inkjet printing stating "this side faces artwork" indicates the UV coated side. For all other Tru Vue glass products, either side can be scored
  • Keep the glass cutter clean of glass chips by brushing away fragments frequently with a horse hair brush


Tru Vue glass products are clean and ready to use. If spot cleaning is needed, use the following techniques:

  • Place the glass on a clean, non-abrasive surface for cleaning
  • Use a clean, soft, lint-free cloth to clean the glass. Tru Vue recommends using a micro-fibre cloth
  • Spray a small amount of ammonia-free cleaner onto the cloth. Spraying on the cloth will prevent streaking and overspray
  • Press the cloth against the glass and clean in round, circular motions to reduce streaking or leaving spots

Home | Frame Collections | Matboard | Glazing | Accessories | Style Notebooks | Machinery | About | Contact | Copyright © 2013 Megawood Larson-Juhl